6 MDW 9031/9031DCP Pocket Phone Compatibility

MDW 9031 Compatibility

 

 

 

 

Consult your System Administration manuals for this compatibility. If your system does not support the items above, consult the System Administration manual for the BIS-10 phone (Apparatus Code 7303S).

Accessing Certain Voice Mail Systems with a DEFINITY System

After dialing into some voice mail systems (for example, Octel 200/250, 300/350), the non-DCP MDW 9031 Pocket Phone may not provide touch tones in order to access the voice mail system prompts. If you experience this problem after dialing into your voice mail system, press the / button twice. After pressing the / button twice, your Pocket Phone will generate touch tones and you will be able to navigate within your voice mail system. When you end your call to your voice mail system, or press any non-dialpad button on your Pocket Phone (that is, Conf, Trans, Hold, Redial, Mute), your MDW 9031 will stop generating touch tones behind the voice mail system. You will need to re-enter /whenever you dial into these voice mail systems or after you have pressed a non- dialpad button.

To connect the communications system switch and the MDW 9031 Pocket Phone, use the following:

~An ANN17B Hybrid pack in conjunction with a DS-1 carrier for older communications system switches that do not accommodate Universal modules (System 85 -R2V1, R2V2, R2V3, and R2V4)

~Either a TN762B Hybrid pack or a ZTN79 ATL pack for System 25

~A TN762B Hybrid pack for newer communications system switches that accommodate Universal modules:

System 75—R1V1, R1V2, and R1V3 DEFINITY G1 (R1V4) DEFINITY G1 (R1V5)

DEFINITY G3 Version 1.1 and Version 2 DEFINITY G3 Version 3

~Either a TN762B (in a universal mod carrier) or an ANN17B (in a traditional mod carrier) Hybrid pack for DEFINITY G2 (G2.1 and G2.2), depending upon the actual hardware configuration.

Note: For DEFINITY G2.1 and G2.2, General Terminal Administration (GTA) can be used to set up “custom” set types so that administration can be done using that custom set type.

System 25 users cannot program Recall for use with systems such as Centrex.

Only the System Administrator can assign features. Use the following guidelines:

~Do not assign the following features: Auto Answer, Inspect, Directory, Next, Local, Call, and Manual Callback Queuing.

~If programming the Flex DSS or Repertory Dial feature, dial the number to be recorded and push the button you are assigning to the feature. You will hear three short beeps and a dial tone to confirm programming.

130 Issue 3 October 1999

MDW 9031/9031DCP Wireless Pocket Phone Installation and Use 503-801-166

Page 138
Image 138
Lucent Technologies MDW 9031DCP manual Accessing Certain Voice Mail Systems with a Definity System