MDW 9031 Compatibility | MDW 9031/9031DCP Pocket Phone Compatibility 6 | ||
|
|
|
|
Programming Features for PARTNER, MERLIN, and MERLIN LEGEND Systems
On all PARTNER, MERLIN, and MERLIN LEGEND systems, you can assign a feature to an available button (a button that does not have a line or another feature assigned to it):
1To enter programming mode, turn on the handset, press i, then press / followed by 00.
2Press the Select button ( ") to move the Selection rectangle to the row of line indicators containing the available button.
3Press the Column button ( '’) under the button that you want.
4Program the feature (using the procedure described in the manual for your PARTNER, MERLIN, or MERLIN LEGEND Communications Systems).
Note: Some features provide a visual indication in the handset display that the feature is turned on. Be aware that if you turn off the handset while using one of these features, you may forget that the feature is on. To verify the status of such a feature, you can simply press the "button to “wake up” the phone and activate the display.
5To exit programming mode, press /followed by 00or turn off the handset.
Note: The above instructions do not apply to System 25, System 75, System 85, and DEFINITY Systems, because in those systems, features are assigned by the System Administrator.
Communications System Compatibility
This section describes some communications
•PARTNER
•MERLIN
•System 25, System 75, System 85, and DEFINITY
Note: For all systems configured as key systems (for example, PARTNER or
MERLIN), only three carriers are allowed. For all systems configured as
PBX systems (for example, DEFINITY), you can use up to five carriers.
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use | Issue 3 October 1999 123 |
