3 Using the MDW 9031/9031DCP Pocket Phone | Handset | |
|
|
|
Enabling or Disabling Backlighting
3While still holding ", press O.
The handset beeps twice, and the display shows the handset settings, indicating you are in Local Mode. (While in Local Mode, the MDW 9031/9031DCP can still receive notification of incoming calls.)
If Line Preselection is enabled, PSEL appears on the top line of the display. For example:
If Line Preselection is disabled, no icon appears.
4Press and hold “P” ( 7) for three seconds.
The handset display shows PRESELECTION:ON if Line Preselection is enabled or PRESELECTION:OFF if Line Preselection is disabled. For example:
5To toggle between ON and OFF to enable or disable Line Preselection, press ".
6To exit Local Mode, press O.
Backlighting for the display is factory set to ON for the MDW 9031/9031DCP Pocket Phone. To toggle the Backlighting features OFF (and ON), use the following procedure:
1Make sure the handset is turned off.
2Press and hold the Select button ( ") for three seconds.
3While still holding ", press O.
The handset beeps twice, and the display shows the handset settings, indicating you are in Local Mode. (While in Local Mode, the MDW 9031/9031DCP can still receive notification of incoming calls.)
a Press “L” ( 5) for “Lighting.” The Backlighting toggles ON or OFF each time you press the 5.
b After setting the correct Backlighting state, press Ofor normal Pocket Phone use.
80 Issue 3 October 1999 | MDW 9031/9031DCP Wireless Pocket Phone Installation and Use |
