2 Installing the MDW 9031/9031DCP Pocket Phone | Installing Multiple Carriers | ||
|
|
|
|
Installing the Remaining Radio Modules
To install the remaining radio modules:
1Power down the carriers.
2Remove the plastic cap covering each radio module’s card edge before inserting the radio modules into the carriers.
3Beginning with the first empty slot and working from left to right, insert a radio module into each slot of the control carrier. Hook each radio module onto a mounting rod. Slowly swing the radio module’s card edge into the card edge connector on the back of the carrier.
Note: Slot 6 of a Model 117A3 control carrier must always contain a radio module to pass the synchronization signal to the next carrier.
A Model 117A4 carrier does not require Slot 6 to be filled.
54 Issue 3 October 1999 | MDW 9031/9031DCP Wireless Pocket Phone Installation and Use |
