2 Installing the MDW 9031/9031DCP Pocket Phone | Handset | |
|
|
|
Handset
This section explains how to install the handset battery pack, change the communications system setting, and fill out the handset label.
Inserting and Removing the Handset’s Battery Pack
To insert and remove the battery pack:
1To insert the battery pack into the handset, insert the two small rectangular tabs located along the bottom back edge of the handset into the two rectangular holes along the bottom front edge of the battery pack.
Rectangular tabs |
2Press the battery pack downward until it clicks into place.
The battery pack must be charged prior to using the handset. See “Battery
Charger” later in this chapter for instructions.
Spring latch |
60 Issue 3 October 1999 | MDW 9031/9031DCP Wireless Pocket Phone Installation and Use |
