✃
Battery Charger Wall-Mounting Template
Use the template below to position the screws for mounting your MDW 9031/9031DCP Pocket Phone battery charger:
1Cut out the template along the dotted line.
2Lightly affix the template to the wall with tape where you want to attach the battery charger. If possible, choose a location that will position at least one of the screw holes over a wall stud.
3Mark the wall.
4Position a wall spacer on each of the two wood screws provided, and insert the screws in the wall as far as they will go at the places you marked.
Note: If you cannot locate a wall stud for one of the screws, use molly bolts or another type of
✃
1.5inches (3.81 cm) center to center
✃
