Lucent Technologies MDW 9031DCP manual Lclp

Models: MDW 9031 MDW 9031DCP

1 161
Download 161 pages 39.52 Kb
Page 81
Image 81

Handset

Using the MDW 9031/9031DCP Pocket Phone 3

 

 

 

When the display is blank, the handset is either turned off or in the power-saving “sleep” mode. You can activate the display and Backlighting (if programmed) by pressing O, turning the handset on, or by pressing " to “wake it up.”

Display Messages The top line of the handset display uses up to 16 alphanumeric characters to provide messages such as the following:

LCL:P (or LCL:D, LCL:M1, or LCL:M2) indicates that the handset is in Local Mode, and tells which communications system the button mapping is set to emulate:

LCL:P

PARTNER Systems

 

 

LCL:D

DEFINITY Systems, System 25, System 75, and

 

System 85

 

 

LCL:M1

All MERLIN Systems (except MERLIN 410

 

and MERLIN 820), including MERLIN LEGEND

 

 

LCL:M2

MERLIN 410 and MERLIN 820

 

 

WIRELESS TEST indicates that the handset is in Wireless Test Mode; 1 through 10 are used to measure signal strength and voice quality in Wireless Test Mode.

VIBR indicates that the vibrator is enabled to notify you of incoming calls.

PSEL indicates that Line Preselection is enabled.

PRESELECTION:ON or PRESELECTION:OFF is displayed when you enter Preselection Mode, and indicates the status of the Line Preselection option.

CHANGE BUTTN MAP is an error message indicating that the handset is set for the wrong communications system. See “Changing the Communications System Setting” in Chapter 2 for instructions for changing the setting.

MAP:P (or MAP:D, MAP:M1, or MAP:M2) is displayed when you enter Button Mapping Mode, and indicates the communications system to which the MDW 9031/9031DCP buttons are currently mapped:

MAP:P

PARTNER Systems

 

 

MAP:D

DEFINITY Systems, System 25, System 75, and

 

System 85

 

Note: The MDW 9031DCP should only be set

 

to MAP:D for DEFINITY.

 

 

MAP:M1

All MERLIN Systems (except MERLIN 410

 

and MERLIN 820), including MERLIN LEGEND

 

 

MAP:M2

MERLIN 410 and MERLIN 820

 

 

RANGE is an error message indicating that the handset is not communicating with its radio module. See Chapter 5, “Troubleshooting,” for help in resolving this problem.

MDW 9031/9031DCP Wireless Pocket Phone Installation and Use 503-801-166

Issue 3 October 1999 73

Page 81
Image 81
Lucent Technologies MDW 9031DCP manual Lclp