4 Maintaining the MDW 9031/9031DCP Pocket Phone | Swapping Extensions | |
|
|
|
Swapping Extensions
If you want to change your phone’s extension number assignment, make sure the radio module or carrier(s) is unplugged before you unplug the telephone line cord from the communications system switch/control unit.
Power down and then repower the carrier(s) after all extension changes are made.
To swap extensions:
1Unplug the carrier(s) power cord/AC adapter from the wall outlet.
Note: When power is disconnected from the radio module or carrier, the receiver and alerter volumes are reset to the factory default settings.
2Unplug the telephone line cords from the communications system switch/control unit for the extensions that you want to change.
3Insert the telephone line cords for the extensions that you want to change into the desired extension jack or terminal/station connector on your communications system switch/control unit.
N | X |
|
S | T |
|
I | E |
|
O | N |
|
N | S |
|
S | I | MUSIC |
| O | |
|
| ON |
| N | HOLD |
| S |
|
98 Issue 3 October 1999 | MDW 9031/9031DCP Wireless Pocket Phone Installation and Use |
