
MDW 9031 Compatibility | MDW 9031/9031DCP Pocket Phone Compatibility 6 | ||
|
|
|
|
Setting the Line Ringing Options for PARTNER Systems
Use the following guidelines to ensure optimal voice quality when using MDW 9031 Pocket Phones with a PARTNER, PARTNER Plus, PARTNER II, or PARTNER Advanced Communications System in key mode:
Note: For PARTNER II hybrid systems that use pooled lines, set the Line Ringing options as described in the following table if more than six MDW 9031 Pocket Phone handsets have the same pooled line appearance.
Telephone | TransTalk 9000 System with | TransTalk 9000 System with Three | |
Communications | Two Carriers (one control and | Carriers (one control and two | |
System | one expansion carrier) | expansion carriers) | |
|
|
| |
PARTNER | 1 Set Line Ringing for each | Not applicable; PARTNER supports up | |
| extension that has a radio | to 12 phones. | |
| module in the control carrier to |
| |
| Ring. |
| |
| 2 Set Line Ringing for each |
| |
| extension that has a radio |
| |
| module in the expansion carrier |
| |
| to No Ring. (Install an external |
| |
| audible alert for these |
| |
| extensions.) |
| |
|
|
| |
PARTNER Plus | 1 Set Line Ringing for each | 1 Set Line Ringing for each extension | |
PARTNER II | extension that has a radio | that has a radio module in the control | |
module in the control carrier to | carrier to Ring. | ||
| |||
PARTNER Advanced | Ring. | 2 Set Line Ringing for each extension | |
Communications System |
| ||
2 Set Line Ringing for each | that has a radio module in the | ||
| |||
| extension that has a radio | expansion carrier #1 to Delayed | |
| module in the expansion carrier | Ring. | |
| to Delayed Ring. | 3 Set Line Ringing for each extension | |
|
| ||
|
| that has a radio module in the | |
|
| expansion carrier #2 to No Ring. | |
|
| (Install an external audible alert for | |
|
| these extensions.) | |
|
|
|
The MDW 9031 does not have a speaker; therefore, it does not support voice announce/page and call groups.
MERLIN Systems | • On MERLIN II and MERLIN LEGEND Systems, you must connect your |
| wireless phone to an available jack on either a 408 outside line/analog telephone |
| module or an 008 analog telephone module. |
| • Since the MDW 9031 does not have a speaker function, the Voice Announce |
| feature must be disabled. It is recommended that you use MERLIN 206/410/820 |
| Systems installed with Feature Package 2 with your wireless phone, so that you |
| can disable that feature. |
| • Since the MDW 9031 has no speaker function, it should not be assigned to a |
| paging group. |
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use | Issue 3 October 1999 125 |