Lucent Technologies MDW 9031DCP manual Installing a Single Radio Module

2 Installing the MDW 9031/9031DCP Pocket Phone Installing a Single Radio Module

3Detach the rubber feet from the shipping card. Apply them to marked areas on the underside of the radio module.

4Place the wall-mounting plate against the wall. Choose a location backed by a wooden stud (if unavailable, use toggle bolts instead of the supplied wood screws). Lightly tap a nail into the wall to start holes. Then screw the plate flush to the wall. Place the radio module over the plate, then slide it downward to lock it into place.

Note: Do not remove the plastic cap covering the radio module’s card edge.

Screw

Holes

18 Issue 3 October 1999 MDW 9031/9031DCP Wireless Pocket Phone Installation and Use 503-801-166