2 Installing the MDW 9031/9031DCP Pocket Phone | Handset | |
|
|
|
4Press and hold “M” ( 6) for three seconds to enter Button Mapping Mode.
The handset display shows one of the following:
MAP:P | PARTNER Systems |
|
|
MAP:D | DEFINITY Systems, System 25, System 75, and |
| System 85 |
| Note: The MDW 9031DCP should only be set |
| to MAP:D for DEFINITY. |
|
|
MAP:M1 | All MERLIN Systems (except MERLIN 410 |
| and MERLIN 820), including MERLIN LEGEND |
|
|
MAP:M2 | MERLIN 410 and MERLIN 820 |
|
|
5Press " repeatedly to cycle through the settings until the display appropriate for your communications system is shown.
6Press Owhen the correct setting is displayed.
The top line of the display shows information appropriate to the communications system you are using.
7To verify your setting, repeat Steps
PARTNER Systems | LCL:P |
|
|
DEFINITY Systems, System 25, System 75, and | LCL:D |
System 85 |
|
|
|
All MERLIN Systems (except MERLIN 410 and | LCL:M1 |
MERLIN 820), including MERLIN LEGEND |
|
|
|
MERLIN 410 and MERLIN 820 | LCL:M2 |
|
|
For a description of the button mapping between the MDW 9031/9031DCP Pocket Phone and the wired telephones for your communications system, or to program features on buttons, see the appropriate “Button Mapping” topics in Chapter 6.
62 Issue 3 October 1999 | MDW 9031/9031DCP Wireless Pocket Phone Installation and Use |
