Lucent Technologies MDW 9031DCP manual Preselecting a Line, Using a Headset

Handset Using the MDW 9031/9031DCP Pocket Phone 3

To deselect the line or button, press O.

For information about assigning features to buttons, see “Programming Features for PARTNER, MERLIN, and MERLIN LEGEND Systems” in Chapter 6.

Preselecting a Line

You may sometimes want to select a line other than the line to which the communications system automatically connects you. To preselect a line, you must first enable Line Preselection. See “Enabling or Disabling Line Preselection” earlier in this chapter.

Once Line Preselection is enabled, use the following procedure:

1If the handset is “asleep,” press "to wake it up and activate the display.

2If the Selection rectangle in the handset display is not surrounding the row that includes the line you want to use, press "repeatedly until the rectangle encloses that row. (See “Column and Select Buttons” earlier in this chapter for more information.)

3Press the '’button that corresponds to the line within the Selection rectangle that you want to select.

The ON icon flashes in the display and the handset emits double beeps.

4Press O.

The ON icon displays steadily, and you are connected to the line you chose.

Accessing Certain Voice Mail Systems with a DEFINITY System

Note: This section only applies to the MDW 9031 Pocket Phone.

After dialing into some voice mail systems (for example, Octel 200/250, 300/350), the MDW 9031 Pocket Phone may not provide touch tones in order to access the voice mail system prompts. If you experience this problem after dialing into your voice mail system, press the / button twice. After pressing the / button twice, your Pocket Phone will generate touch tones and you will be able to navigate within your voice mail system. When you end your call to your voice mail system, or press any non-dialpad button on your Pocket Phone (that is, Conf, Trans, Hold, Redial, Mute), your MDW 9031 will stop generating touch tones behind the voice mail system. You will need to re-enter /whenever you dial into these voice mail systems or after you have pressed a non-dialpad button.

Using a Headset

Lucent Technologies offers the Supra 9031 headset, which is specifically designed for use with your MDW 9031/9031DCP wireless phone or the Radium (over-the-ear) headset. A headset assists in call answering and provides hands-free operation.

For ordering information, see “Ordering Replacement and Optional Parts” in Chapter 4.

MDW 9031/9031DCP Wireless Pocket Phone Installation and Use 503-801-166 Issue 3 October 1999 89