2 Installing the MDW 9031/9031DCP Pocket Phone | Installing Multiple Carriers | ||
|
|
|
|
Installing a Single Radio Module in Each Carrier
To install a single radio module in each carrier:
1Power down the carriers.
2Remove the plastic cap covering each radio module’s card edge before inserting the radio modules into the carriers.
3Working from left to right, insert a radio module into the first slot (Slot 1) of each carrier; hook each radio module onto the mounting rod. Slowly swing the radio module’s card edge into the card edge connector on the back of the carrier. (Exception: use Slot 6 instead of Slot 1 for a Model 117A3 control carrier.)
Note: Slot 6 of a Model 117A3 control carrier must always contain a radio module to pass the synchronization signal to the next carrier.
A Model 117A4 carrier does not require Slot 6 to be filled.
48 Issue 3 October 1999 | MDW 9031/9031DCP Wireless Pocket Phone Installation and Use |
