3 Using the MDW 9031/9031DCP Pocket Phone | Handset | |
|
|
|
Handset Display (with Backlighting)
The MDW 9031/9031DCP Pocket Phone display has one
1
2
3 4 5 6
MSG RANGE ON | MUTE | 7 |
8 |
| 9 |
|
|
Note: This illustration is intended to show you what all of the indicators look like, but you will never see all of the line status indicators illuminated at once.
1This line of the display gives you the information you would see on a wired system phone’s display, except that the time is not provided. The information varies according to which communications system you are using. For example, the display may show the current date, the number you are calling, or Caller ID information (if the system supports this feature). This display line is also used for feedback when testing and programming the handset. See “Display Messages” later in this chapter for more information about messages.
2MSG icon indicates that you have a message.
3RANGE icon indicates that the handset is out of range or almost out of range. The handset also beeps. For more information, see “Range Indicators” later in this chapter.
4ON icon indicates that the handset has been turned on by pressing O.
5Battery icon flashes to indicate a low battery condition. The handset also emits 2 beeps. For more information, see “Low Battery Indicator” later in this chapter.
6No Ring icon indicates that the alerter is disabled. If the alerter is enabled, no icon is displayed.
7MUTE icon indicates that the handset microphone was turned off by pressing
M.
8Line Status Indicators show the status of line or programmable/intercom/drop buttons. See Chapter 6 for
9Selection rectangle indicates the active row for line or programmable/intercom/drop button selection. See “Column and Select Buttons” earlier in this chapter.
72 Issue 3 October 1999 | MDW 9031/9031DCP Wireless Pocket Phone Installation and Use |
