Installing Multiple Carriers | Installing the MDW 9031/9031DCP Pocket Phone 2 | ||
|
|
|
|
3At this stage of your installation, verify the LEDs displayed match the third of the SYNC and CONTROL/EXP LED Codes label, depending on whether the carrier is the control or an expansion carrier.
4If the LEDs on your installation do not reflect this pattern, there is probably a mistake in the cabling. Power down the carriers and check that you have correctly followed Steps 6 through 8 in “Mounting and Cabling Multiple Carriers.” If you are still having problems, see Chapter 5, “Troubleshooting.”
5If your LEDs match the pattern in the illustration, you can feel confident that your carriers are cabled correctly.
6Go to “ Installing a Single Radio Module in Each Carrier” (page 48) .
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use | Issue 3 October 1999 47 |
