
C Specifications
GENERAL– Continued
Electrical |
| Handset | 1.0 watt | |
Specifications: |
| Battery Charger (BC) | 15 watts | |
(Power) |
| |||
|
|
|
| |
|
| Radio Module (RM) | 4.0 watts | |
|
| Carrier (CA) w/6 RMs | 24 watts | |
|
| Power Supply (BC) | 15 watts (10V 1.5 A) | |
|
| Power Supply (RM) | 6.0 watts (10V 600 mA) | |
|
| Power Supply (CA) | 30 watts (9V) | |
Battery Pack Life: |
| Standard Nickel Metal Hydride | 3 hours talk time/22 hours standby time | |
|
| Extended Nickel Metal Hydride | 8 hours talk time/72 hours standby time | |
|
|
| ||
RF SYSTEM PARAMETERS: |
|
| ||
|
|
|
|
|
Frequency Band: |
| 902 – 928 MHz |
|
|
Channel Spacing: |
| 150 KHz |
|
|
|
|
|
| |
Total Channel |
| 50 (Channels Dynamically Allocated out of 173) | ||
Capability: |
|
|
|
|
Duplex Method: |
| Time Division Duplex (TDD) (Transmit and Receive on same frequency) | ||
Transmitter |
| Dynamic Power Adjustment: 1 mW ERP Minimum to 160 mW ERP Maximum | ||
Output Power: |
|
|
|
|
Receiver |
|
|
| |
Sensitivity: |
|
|
|
|
OTHER: |
|
|
|
|
|
|
| ||
Electrical | • | |||
Requirements: | • | Outlet must not be controlled by an on/off switch | ||
| ||||
| • Grounding to comply with Underwriters Laboratories (UL) 1459 | |||
Requirements For |
| Installation of a telephone or other standard (tip/ring) device in another building requires | ||
| the following | |||
Extensions: |
| telephone device from surges: |
|
|
•MDW 9031/9031DCP Pocket Phone: two Lucent Technologies 146D protectors (ETR); two Lucent Technologies 146E protectors (ATL)
Wiring: | • MDW 9031/9031DCP Pocket Phone: Lucent Technologies SYSTIMAX® or at least |
| |
| • Lucent Technologies SYSTIMAX or at least |
| “loop”) ATL |
| • Bridging Adapter: Lucent Technologies 267F2 (ETR) |
| • Bridging Adapter: Lucent Technologies 267C (ATL) |
| • Range: 1,000 feet (305 m) for the Radio Module (26 AWG) |
146 Issue 3 October 1999 | MDW 9031/9031DCP Wireless Pocket Phone Installation and Use |