4 Maintaining the MDW 9031/9031DCP Pocket Phone
Important Safety Instructions
Please see “Important Safety Instructions” at the beginning of Chapter 2.
Removing Radio Module from Carrier
•Slot 6 of a Model 117A3 control carrier must always contain a radio module to pass the synchronization signal to the next carrier.
•See “Key Components” in Chapter 2 for additional picture detail.
To remove a radio module from the carrier:
1Unplug the carrier(s) power cord/AC adapter from the wall outlet.
Note: When power is disconnected from the radio module or carrier, the receiver and alerter volumes are reset to the factory default settings.
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use | Issue 3 October 1999 95 |
