Base and Motor/Fan
Components and Hardware Needed: | Qty |
Base | 1 |
Casters | 4 |
Flange Bolts | 32 |
Stand Legs | 4 |
Motor/Fan Assembly | 1 |
To assemble the base: |
|
1.Attach each caster to the underside of the base using four
2.Attach each leg to the underside of the fan/ motor assembly using two
Figure 5. Attaching legs to motor/fan assembly.
3.Attach the base to the legs using eight 5⁄16-18 x 1⁄2" flange bolts, as shown in Figure 6.
4.Turn the motor/base assembly right-side up and place carefully onto the floor.
Collector |
|
Components and Hardware Needed: | Qty |
Gasket | 1 |
Collector | 1 |
Flange Bolts | 8 |
Hex Nuts | 8 |
Flat Washers 3⁄8 | 16 |
1 | |
Base/Motor/Fan Assembly | 1 |
To attach the collectors to the motor/fan assembly:
1.Fit the gasket onto the outtake of the motor/ fan assembly.
2.Mount the collector to the motor/fan assem- bly using the flange bolts, flat washers and hex nuts, as shown in Figure 7.
Figure 7. Mounting collectors to motor/fan
assembly.
Figure 6. Attaching base to legs.
G5954 5HP Dust Collector |