Woodstock W1687 instruction manual Collection Bags, Securing the upper bag threaded Band clamp

Page 17

Figure 14. Securing the upper bag threaded

band clamp.

Figure 15. Securing the lower bag quick-

release band clamp.

Collection Bags

There are (4) collection bags on the Model W1687. The upper bags can be identified by the SHOP FOX® logo. The upper bags are secured to the collector bodies by threaded band clamps and the lower bags are secured by quick-release band clamps.

1.Fasten the upper bags to the collector bod- ies by threading the bolts and locknuts through each band clamp as shown in Figure 14.

2.Fasten the lower bags to the collector bod- ies by means of the quick-release band clamps as shown in Figure 15.

3.Slide the fabric loops of the two upper bags over the upper support bracket hooks as shown in Figure 16.

ASSEMBLY

Figure 16. Attaching the bag loop
to the bracket	-15-
	-15-

Image 17

Contents HP Dust Collector Page Table of Contents About Your New Dust Collector Woodstock Service And SupportIntroduction Machine Specifications Warranty And ReturnsStandard Safety Instructions SafetyKeep proper footing and balance at all times HP Dust Collector Additional Safety Instructions For Dust CollectorNever collect anything except wood dust Avoiding Potential Injuries220V Operation Electrical RequirementsExtension Cords GroundingUnpacking Assembly InstructionsComponent Layout Clean Up Base GeneralOutlet Duct Impeller/Motor AssemblySupport Brackets CollectorsSecuring the upper bag threaded Band clamp Collection BagsSecuring the 4-way inlet fitting Way Inlet FittingSystem Grounding Wire inside and around pipeMaterial Selection AccessoriesBird’s eye view of layout System DesignTest Run Adjusting OutletOperations Lubrication MaintenanceCleaning Wear a respirator when Changing the bags Bag CleaningClosure 220V Power Source Wiring DiagramPage Ring Gasket Warranty Card Woodstock INTERNATIONAL, INC