Woodstock W1687 instruction manual Standard Safety Instructions

Page 6

SAFETY

SAFETY

READ MANUAL BEFORE OPERATING MACHINE. FAILURE TO FOLLOW INSTRUCTIONS BELOW WILL RESULT IN PERSONAL INJURY.

Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. It may also be used to alert against unsafe practices.

This symbol is used to alert the user to useful information about proper NOTICE operation of the equipment.

Standard Safety Instructions

1.Thoroughly read the instruction manual before operating your machine. Learn the applications, limitations and potential hazards of this machine. Keep manual in a safe, convenient place for future reference.

2.Keep work area clean and well lighted. Clutter and inadequate lighting invite potential hazards.

3.Ground all tools. If a machine is equipped with a three-prong plug, it must be plugged into a three- hole grounded electrical receptacle or grounded extension cord. If using an adapter to aid in accom- modating a two-hole receptacle, ground using a screw to a known ground.

4.Wear eye protection at all times. Use safety glasses with side shields or safety goggles that meet the national safety standards, while operating this machine.

5.Avoid dangerous environments. Do not operate this machine in wet or open flame environments. Airborne dust particles could cause an explosion and severe fire hazard.

6.Ensure all guards are securely in place and in working condition.

7.Make sure switch is in the OFF position before connecting power to machine.

8.Keep work area clean, free of clutter, grease, etc.

9.Keep children and visitors away. Visitors should be kept at a safe distance while operating unit.

10.Childproof workshop with padlocks, master switches or by removing starter keys.

11.Disconnect machine when cleaning, adjusting or servicing.

12.Do not force tool. The machine will do a safer and better job at the rate for which it was designed.

-4-

Image 6
Contents HP Dust Collector Page Table of Contents Woodstock Service And Support IntroductionAbout Your New Dust Collector Warranty And Returns Machine SpecificationsSafety Standard Safety InstructionsKeep proper footing and balance at all times Additional Safety Instructions For Dust Collector HP Dust CollectorAvoiding Potential Injuries Never collect anything except wood dustExtension Cords Electrical Requirements220V Operation GroundingAssembly Instructions UnpackingComponent Layout Clean Up General BaseImpeller/Motor Assembly Outlet DuctCollectors Support BracketsCollection Bags Securing the upper bag threaded Band clampWay Inlet Fitting Securing the 4-way inlet fittingWire inside and around pipe System GroundingAccessories Material SelectionSystem Design Bird’s eye view of layoutAdjusting Outlet OperationsTest Run Maintenance CleaningLubrication Bag Cleaning Wear a respirator when Changing the bagsClosure Wiring Diagram 220V Power SourcePage Ring Gasket Warranty Card Woodstock INTERNATIONAL, INC