CAUTION: Never remove safety grid for any reason except to perform maintenance procedures. There is a high speed blower wheel inside the blower housing that can amputate fingers, grab loose clothing or neckties. Make certain the dust collector is discon- nected from the power source before performing any maintenance procedures.
8.Place the entire blower and motor assembly (C) Fig. 13, into collection drum (R) (not supplied).
W ARNING: The dust collector has a safety guard (P) Fig. 14, at the blower housing of the dust collector, which contains a high speed radial blade that can amputate fingers, grab loose clothing and neckties, or propel dust at high velocities. This guard is for your safety. DO N O T R E M O V E THIS G U A R D F O R A N Y REASON!
9.Place the bag elbow (V) Fig. 14, over the dust dis- charge port (T). Align three holes in bag elbow with three mounting holes in dust discharge port (T) and fasten bag elbow (V) to discharge port (T) with three sheet metal screws (Y) Figs. 14 and 15, two of which are shown.
W
V
L
W
Fig. 12
C
R
Fig. 13
TV
P
Y
Fig. 14
Y
Fig. 15
8