Delta AP300 instruction manual Additional Specific Safety Rules

Page 5

ADDITIONAL SPECIFIC SAFETY RULES

FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS INJURY.

DO NOT USE THIS UNIT TO FILTER METAL DUST. Combining wood and metal dust can create an explosion or fire hazard. This unit is intended to filter non-explosive atmospheres only.

DO NOT USE THIS UNIT TO DISSIPATE FUMES OR SMOKE. Explosions or fire can result. This dust collector is intended for use where only dry airborne dust is present. Its use should be limited to non- explosive, non-metallic atmospheres.

1. DO NOT OPERATE THIS UNIT UNTIL IT IS

COMPLETELY ASSEMBLED AND INSTALLED ACCORDING TO THE INSTRUCTIONS. A unit incorrectly assembled can cause injury.

2.OBTAIN ADVICE FROM YOUR SUPERVISOR, INSTRUCTOR, OR ANOTHER QUALIFIED PERSON if you are not thoroughly familiar with the operation of this unit. Knowledge is safety

3.FOLLOW ALL WIRING CODES and recommended electrical connections to prevent electrical shock or electrocution.

4.DO NOT PULL THIS UNIT BY THE POWER CORD. Do not allow the power cord to come in contact with sharp instruments or edges, hot surfaces, or oil or grease. Do not place any weight on top of the power cord. A damaged power cord can cause electrical shock or electrocution.

5.SUPPORT THIS UNIT OR SECURELY CLAMP IT TO THE WORK SURFACE WHEN IT IS USED IN A PORTABLE APPLICATION to eliminate potential injury and/or damage from falling.

6.ENSURE THAT THE INTAKE AND EXHAUST AREAS ARE CLEAR PRIOR TO STARTING THE UNIT. Clogged intakes or exhausts can cause an explosion and/or fire.

7.DO NOT USE THE DUST COLLECTOR to pick up flammable liquids such as gasoline. Do not use the dust collector near flammable or combustible liquids. Explosion and/or fire can occur.

8.KEEP ARMS, HANDS, AND FINGERS AWAY FROM THE FAN. Avoid all exposure to rotating parts to prevent injury.

9.DO NOT OPERATE THIS UNIT WITHOUT THE DUST COLLECTION BAG IN PLACE AND PROPERLY SECURED. Sawdust and other debris can provide the potential for fire and/or explosion and can also cause inhalation problems.

10.INSPECT THE DUST BAG FOR CUTS, RIPS, OR TEARS. Replace damaged bags or vacuum hoses. Sawdust and other debris can provide the potential for fire and/or explosion and can also cause inhalation problems.

11.ALWAYS USE THE INTAKE CAPS TO COVER UNUSED DUST PORTS. Debris can cause damage to the unit and injury.

12.DO NOT ATTEMPT TO REMOVE OR REPLACE the dust collection bag(s) while the unit is connected to the power source. Exposed fan blades can cause severe injuries.

13.

MAINTAIN THE

UNIT IN TOP CONDITION.

 

Clogged filters can increase the potential for fire or

 

explosion. Follow all instructions for changing and

 

cleaning filters.

 

 

14.

STORE THIS

UNIT IN A LOCATION

that

 

eliminates the potential for damage to the power

 

cord. A damaged power cord can cause shock or

 

electrocution. Safely store power cord on the unit

 

to eliminate tripping hazards.

 

15.TURN THE UNIT “OFF” AND DISCONNECT THE UNIT from the power source before installing or removing accessories, before adjusting or changing set-ups, or when making repairs. An accidental start-up can cause serious injury.

16.TURN THE UNIT “OFF”, disconnect the unit from the power source, and clean the table/work area before leaving the area.

SAVE THESE INSTRUCTIONS.

Refer to them often

and use them to instruct others.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Portable Single-Stage Dust Collector Important Safety Instructions Table of ContentsCalifornia Proposition Safety Guidelines DefinitionsImportant Safety Instructions General Safety RulesFailure to Follow These Rules MAY Result in Serious Injury Additional Specific Safety RulesGrounding Instructions Power ConnectionsMotor Specifications Extension Cords Volt Single Phase OperationFunctional Description Carton ContentsAssembly Tools Required AssemblyCasters Exhaust FlangeDisconnect machine from power source Dust Port Tube and Connector to Dust Collector BodyAlign the two holes in the intake support angle brace Vacuum Hose to Dust Collector Dust BAG to Dust Collector Starting and Stopping Dust Collector Locking Switch OFF PositionOperation Machine USE Transportation and Storage TroubleshootingFailure to Start MaintenanceKeep Machine Clean Warranty ServiceAccessories Recolector de Polvo Portátil de Etapa Sencilla Pautas DE SEGURIDAD/DEFINICIONES Instrucciones DE Seguridad ImportantesEL USO DE Esta Herramienta Puede Generar Y Dispersar Normas Generales DE SeguridadGuarde Estas Instrucciones Normas Específicas Adicionales DE SeguridadInstrucciones DE Conexión a Tierra Conexiones a LA Fuente DE AlimentaciónEspecificaciones DEL Motor Cordón DE Extensión DE Calibre Mínimo Cordones DE ExtensiónContenido DE Carton Descripción FuncionalPrologo Desempaquetado Y LimpiezaHerramientas DE Ensamblaje Requeridas EnsamblajeRuedecillas DE LA Brida DE LA SalidaPage Page DE UNA Manguera DE Aspiración EN EL Colector DE Polvo DE LA Bolsa Para Polvo EN EL Colector DE Polvo Fijación DEL Interruptor EN LA Posición DE Apagado OperaciónArranque Y Parada DEL Colector DE Polvo Utilizar LA Maquina Transporte Y Almacenamiento Falla DE Ponerse EN Marcha Localizacion DE Fallas MantenimientoMantenga LAS Herramientas Limpias Garantia ServicioAccesorios Canadian PORTER-CABLE Delta Service Centers

AP300 specifications

The Delta AP300 is a state-of-the-art air purification system designed to enhance indoor air quality through advanced filtration technology and smart features. This device is engineered to meet the needs of both residential and commercial spaces, ensuring optimal air cleanliness while providing an array of user-friendly functionalities.

One of the standout features of the Delta AP300 is its three-stage filtration system. The first stage incorporates a pre-filter that captures larger particles such as dust and pet dander, prolonging the life of subsequent filters. The second stage utilizes a true HEPA filter, which is capable of eliminating 99.97% of airborne pollutants, including pollen, mold spores, and fine particulate matter. The final stage consists of an activated carbon filter, which is specifically designed to neutralize odors and volatile organic compounds (VOCs). Together, these filters ensure the air is free of harmful contaminants, making it ideal for allergy sufferers and those concerned about indoor air quality.

Equipped with advanced sensing technology, the Delta AP300 can automatically adjust its purification levels based on real-time air quality readings. Its built-in air quality sensor detects changes in the environment, allowing the unit to operate efficiently and deliver clean air when it matters most. This intelligence not only optimizes performance but also enhances energy efficiency, reducing overall operational costs.

The Delta AP300 also features a sleek and modern design, making it a stylish addition to any room. With its compact dimensions, it can easily fit into various spaces without occupying much room. The user interface is intuitive, featuring a clear LED display that indicates air quality status, filter replacement reminders, and fan speed settings.

Additionally, the Delta AP300 is designed for quiet operation, making it suitable for use in bedrooms or nurseries without causing disturbance. Its multiple fan speeds allow users to customize the airflow according to their preferences.

In summary, the Delta AP300 stands out in the air purification market due to its powerful filtration capabilities, intelligent sensing technology, and user-friendly design. It is an excellent choice for anyone looking to significantly improve their indoor air quality while enjoying a range of modern features that cater to contemporary lifestyles.
Top Page Image Contents