Delta AP300 instruction manual Vacuum Hose to Dust Collector

8.Place intake funnel assembly (A), onto lower support tube (B) Fig. 14, and secure with tube clamp (C).

VACUUM HOSE TO

DUST COLLECTOR

Disconnect machine from power source!

1.Place the intake cap holder (D) on the dust collector as shown in Fig. 15. NOTE: DO NOT COVER THE

INTAKE PORT WITH THE INTAKE CAP WHEN ATTACHING THE HOSE TO THE INTAKE PORT.

2.Place hose clamp (A) Fig. 15, onto one end of vacuum hose (B) and slide hose around intake port

(C) as shown in Fig. 16. Tighten hose clamp (A).

A

C

B

Fig. 14

D

C

A

B

Fig. 15

C A

Fig. 16

12