TO EXPEL AIR POCKETS
1.Release the Follower Rod (22) from the slot on the end cap of the Grease Tube
(2)to allow the Follower Rod to move forward into the Grease Tube
(See Figure B.)
2.Push the Follower Handle (19) forward while depressing the Vent Valve (13).
(See Figure D.)
3.Squeeze the Switch (18) several times to operate the Grease Gun until the trapped air is expelled. Then, push the Follower Rod (22) all the way into the Grease Tube (2). (See Figure D.)
VENT VALVE
(13)
SWITCH
(18)COUPLER
(14)
GREASE TUBE
(2)
FOLLOWER ROD
(22) FOLLOWER HANDLE (19)
FIGURE D
TO PRIME THE GREASE GUN
1.Squeeze the Switch (18) until grease flows smoothly from the Coupler (14). If necessary, depress the Vent Valve (13) to expel air pockets. (See Figure D.)
TO OPERATE THE GREASE GUN
1.Attach a fully charged Battery Pack (3) to the Grease Gun. (See Figure C.)
SKU 92196 | For technical questions, please call | PAGE 10 |