Harbor Freight Tools 92196 operating instructions To Charge the Battery Pack, See Figure a

Page 6

generated, the faster the Battery Pack loses power. A Battery Pack that gets too hot can be permanently damaged. Never over-discharge a Battery Pack by using the tool while tool performance is decreasing. Never attempt to discharge a tool’s Battery Pack by continuing to squeeze the tool Switch (18). When tool performance begins to diminish, stop the tool, re-charge the Battery Pack, and use the fresh Battery Pack for optimal performance.

13.WARNING! People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference or failure of the pacemaker. In addition, people with pacemakers should adhere to the following: Avoid operating power tools alone. Don’t use a power tool with the power switch locked on. Properly maintain and inspect all tools before use to avoid electrical shock.

14. WARNING! The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

SAVE THESE INSTRUCTIONS

TO CHARGE THE BATTERY PACK

NOTE: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram on page 13.

1.NOTE: The Battery Pack (3) requires charging. The first charge requires 1 hour charge time prior to using the Grease Gun. (See Figure A, next page.)

2.When the Battery Pack (3) requires re-charging, a 1 hour charge allows the tool to operate at full power. Do not re-charge the Battery Pack longer than 1 hour, as damage to the Battery Pack and/or Charger (17) will occur.

(See Figure A.)

3.Insert the Battery Pack (3) into the Charging Socket of the Charger. Then, plug the Charger (17) into the nearest 120 volt, grounded, electrical outlet.

(See Figure A.)

4.The Green Light on the Charger (17) will automatically turn on. (See Figure A.)

SKU 92196 For technical questions, please call 1-800-444-3353 PAGE 6

Image 6
Contents For technical questions, or replacement parts, please call Volt Rechargeable Grease GUNUnpacking Product SpecificationsGeneral Safety Rules Save this ManualElectrical Safety Specific Safety Rules Tool USE and CareSKU For technical questions, please call To Charge the Battery Pack See Figure aTo Install a Grease Cartridge See Figure BTo Fill the Grease Tube from a Bulk Container Figure BTo Fill the Grease GUN, Using a Filler Pump To Attach the Battery Pack to the Grease GUNTo Operate the Grease GUN To Expel AIR PocketsTo Prime the Grease GUN See Figure DINSPECTION, MAINTENANCE, and Cleaning Do not use damaged equipmentParts List Please Read the Following CarefullyAssembly Diagram