Harbor Freight Tools 92196 operating instructions SKU For technical questions, please call

Page 5

obstructions, grease, oil, trash, and other debris. Do not use the Grease Gun in areas near flammable chemicals, dusts, and vapors. Do not use this product in a damp or wet location.

2.Maintain labels and nameplates on this product. These carry important infor- mation. If unreadable or missing, contact Harbor Freight Tools for a replacement.

3.When using the Grease Gun, always maintain a firm grip on the tool with both hands.

4.Do not use the Grease Gun or Charger (17) if it has been dropped, dam- aged, left outdoors, or immersed in liquid.

5.To avoid electrical shock, do not handle the Charger (17), its Power Cord Plug, or the Grease Gun with wet hands.

6.Keep the outer body of the Grease Gun dry, clean, and free from oil and grease.

7.Always turn off the Grease Gun and unplug the Charger (17) from its electrical outlet before changing accessories or performing any inspec- tion, maintenance, or cleaning procedures.

8.Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Grease Gun.

9.To avoid electrical shock, do not pull or carry the Charger (17) by its Power Cord.

10.Never leave the Charger (17) unattended when it is plugged into an electrical outlet. Make sure to unplug it from its electrical outlet before leaving.

11.Proper Battery Pack Care: Battery Pack (3) leakage may occur under extreme usage or temperature conditions. If Battery Pack fluid comes in contact with skin, wash with soap and water and rinse with lemon juice and vinegar. If the fluid comes into contact with the eyes, flush with water for several minutes and con- tact a doctor immediately. Never burn the Battery Pack, as it can explode in a fire. Do not charge the Cordless Drill with a leaking Battery Pack. Contact local solid waste authorities for instructions on correct disposal or recycling of the Battery Pack.

12.Always switch to a fresh Battery Pack (3) when tool performance begins to diminish. Severe heat is most destructive to a Battery Pack. The more heat

SKU 92196

For technical questions, please call 1-800-444-3353

PAGE 5

Image 5
Contents Volt Rechargeable Grease GUN For technical questions, or replacement parts, please callGeneral Safety Rules Product SpecificationsUnpacking Save this ManualElectrical Safety Tool USE and Care Specific Safety RulesSKU For technical questions, please call See Figure a To Charge the Battery PackSee Figure B To Install a Grease CartridgeFigure B To Fill the Grease Tube from a Bulk ContainerTo Attach the Battery Pack to the Grease GUN To Fill the Grease GUN, Using a Filler PumpTo Prime the Grease GUN To Expel AIR PocketsTo Operate the Grease GUN See Figure DDo not use damaged equipment INSPECTION, MAINTENANCE, and CleaningPlease Read the Following Carefully Parts ListAssembly Diagram