Chicago Electric 67256 operating instructions Specific Safety Warnings

Page 4

and off. Any power tool that cannot be controlled with the Switch is dangerous and must be repaired.

c. Disconnect the Power Cord from the power source before making any adjustments, changing accessories, or storing the power tool. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d.Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e.Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f. Keep cutting accessories sharp and clean. Properly maintained cutting accessories with sharp cutting edges are less likely to bind and are easier to control.

g.Use the power tool and its accessories in accordance with these instructions, taking into account the working conditions and the work to be performed.

Use of the power tool for operations different from those intended could result in a hazardous situation.

5.Service

a.Have your power tool serviced by a qualified repair person using

only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Specific Safety Warnings

1.Maintain labels and nameplates on the power tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

2.CAUTION: Avoid accidental injury.

Keep hands and fingers safely away from the oscillating Angled Scraper (4), Blades (501, 503), and Sanding Pad (502) when operating the Tool.

3.Avoid unintentional starting. Prepare to begin work before turning on the power tool.

4.Do not lay the power tool down until it has come to a complete stop. Moving parts can grab the surface and pull the tool out of your control.

5.When using a handheld power tool, maintain a firm grip on the tool with both hands to resist starting torque.

6.Do not leave the power tool unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.

7.This product is not a toy. Keep it out of reach of children.

8.People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. In addition, people with pacemakers should:

• Avoid operating alone.

SKU 67256

For technical questions, please call 1-800-444-3353.

Page 4

Image 4
Contents MULTI-FUNCTION Power Tool For technical questions or replacement parts, please callSave This Manual General Safety WarningsFor technical questions, please call Gfci reduces the risk of electric shock Specific Safety Warnings Vibration Safety Grounding Double Insulated Tools Tools With Two Prong PlugsExtension Cords See Outlets for 2-Prong PlugUnpacking SpecificationsSee Table a Components Assembly InstructionsSee Figure B Figure D Operating Instructions Work Piece and Work Area Set UpGeneral Operating Instructions Maintenance Servicing It must be replaced only by a qualified service technicianPlease Read Following Carefully SKU For technical questions, please callTroubleshooting Problem Possible Causes Likely SolutionsParts List and Assembly diagram Part Description QtyLimited 90 DAY Warranty Record Product’s Serial Number Here