Chicago Electric 67256 operating instructions Specifications, Unpacking, See Table a

3.The smaller the gauge number of the wire, the greater the capacity of the cord. For example, a 14 gauge cord can carry a higher current than a 16 gauge cord. (See Table A.)

4.When using more than one extension cord to make up the total length, make sure each cord contains at least the minimum wire size required.

(See Table A.)

5.If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Table A.)

6.If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.

7.Make sure the extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it.

8.Protect the extension cords from sharp objects, excessive heat, and damp or wet areas.

RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*

(120/240 VOLT)

NAMEPLATE	EXTENSION CORD
		LENGTH
AMPERES
	25’	50’	75’	100’	150’
(at full load)
0 – 2.0	18	18	18	18	16
2.1 – 3.4	18	18	18	16	14
3.5 – 5.0	18	18	16	14	12
5.1 – 7.0	18	16	14	12	12
7.1 – 12.0	18	14	12	10	-

*Based on limiting the line

Table A voltage drop to five volts at

150% of the rated amperes.

		Symbology
		Double Insulated
		Canadian Standards Association
		Underwriters Laboratories, Inc.
V~		Volts Alternating Current
	A	Amperes
n0 xxxx/min.		No Load Revolutions per Minute
		(RPM)

Specifications

Electrical Input	120 V~ / 60 Hz / 1.6 A
Motor No Load Speed	19,000 OPM
Sanding Pad Dimensions	3” Triangle
	Sanding Pad (Qty 1)
	Sanding Sheet (Qty 2)
	Angled Cutter Blade
Accessories	(Qty 1)
	Angled Scraper (Qty 1)
	Half Moon Cutter Blade
	(Qty 1)

Unpacking

When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at

1-800-444-3353 as soon as possible.

REV 09f, 10b, 10e

SKU 67256 For technical questions, please call 1-800-444-3353. Page 7