Grizzly T26416 owner manual Set Up, UnpackingInventory

Page 8

SECTION 3: SET UP

UnpackingInventory

This Stapler was carefully packaged for safe transportation. Remove the packag- ing materials from around this tool and inspect it. If you discover the tool is dam- aged, please immediately call Customer Service at (570) 546-9663 for advice.

Save the containers and all packing mate- rials for possible inspection by the car- rier or its agent. Otherwise, filing a freight claim can be difficult.

When you are completely satisfied with the condition of the shipment, inventory the contents.

If any non-proprietary parts are missing (e.g., a nut or a washer), we will gladly replace them; or for the sake of expedi- ency, replacements can be obtained at your local hardware store.

This Stapler presents serious injury hazards to untrained users. Read through this entire manual to become familiar with the controls and operations before starting the tool!

Model T26416 Inventory			Qty
A.	Crown Stapler		1
B.	Hex Wrench 3mm		1
C.	hex Wrench 4mm		1
D.	Bottle for Oil		1
	A
			D
	B	C
	Figure 1. Inventory.

-6-	Model T26416 Crown Stapler

Image 8

Contents Model T26416 Page Table of Contents Safety Safety Instructions For Pneumatic ToolsBefore Operating This Equipment Mation about proper operation of the equipmentSafety Instructions for Pneumatic Tools Additional Safety for Staplers Foreword Contact Info SpecificationsIntroduction SET UP UnpackingInventoryTo load the stapler Loading StaplesAir Deflection Compressed Air System Test Run To test run staplerOperations To perform a typical operationAccessories Safety glassesMaintenance CleaningLubricatingReplacing O-Rings Piston Assemblies ServiceTo replace piston assembly Troubleshooting Symptom Possible Cause SolutionParts To reduce risk of injuryParts List DescriptionWArranty