Grizzly G6042/3 instruction manual Safety, Before Operating This Equipment

Page 2

SAFETY

For Your Own Safety Read Instruction Manual

Before Operating This Equipment

The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progres- sion of symbols is described below. Remember that safety messages by them- selves do not eliminate danger and are not a substitute for proper accident pre- vention measures.

Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. It may also be used to alert against unsafe practices.

NOTICE This symbol is used to alert the user to useful information about proper operation of the equipment.

Safety Instructions For Power Tools

1.KEEP ALL SAFETY DEVICES IN PLACE and in working order.

2.REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of check- ing to see that keys and adjusting wrenches are removed from tool before operation.

3.KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

4.DO NOT USE IN DANGEROUS ENVIRONMENT. Do not use power tools in damp or wet locations, or where any flammable or noxious fumes may exist. Keep work area well lighted.

5.KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept a safe distance from work area.

6.MAKE WORKSHOP CHILD PROOF with padlocks, master switches, or by removing starter keys.

7.DO NOT FORCE TOOL. It will do the job better and safer at the rate for which it was designed.

8.USE THE RIGHT TOOL. Do not force tool or attachment to do a job for which it was not designed.

9.DO NOT USE UNDER THE INFLU- ENCE OF DRUGS OR ALCOHOL.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Gauge Stapler KIT Model G6042/3Safety Before Operating This EquipmentAMP Length Rating Basic Stapler Safety Introduction CommentarySafety Yoke Mechanism Compressed Air SystemOperation Loading StaplerOperating Stapler Example of staple deflectionClearing Jammed Staples Disconnect the stapler from the air supplyCleaning Stapler Oiling StaplerReplacing Pistons/O-Rings Maintenance Notes PBREAKDOWNARTG6042 40A 49A 19AThese items are not shown in the illustration 60 40A 34 P6043034 Trgr Valve Head 35 P6043035 Trgr Valve Stem Troubleshooting Problem Cause ActionWarranty and Returns Warranty Card Place Stamp Here

G6042/3 specifications

The Grizzly G6042/3 is an advanced wood lathe, specifically designed for both professional and hobbyist woodworkers. This powerful tool stands out in the market due to its combination of precise engineering and user-friendly features, making it a favorite among those seeking to enhance their craft.

One of the most notable features of the G6042/3 is its robust construction. With a heavy-duty cast iron body, this lathe minimizes vibrations, ensuring a stable platform for turning. This stability is crucial when working on intricate designs or larger projects, as it provides consistent results and smoother finishes. The lathe's bed is precision-machined, offering a flat surface that contributes to accuracy in all your woodworking tasks.

The G6042/3 boasts a potent motor that delivers impressive torque, allowing for a variety of turning speeds. With its variable speed control, users can easily adjust the RPM to suit different applications, from rough turning to detailed finishing work. This feature not only increases the versatility of the lathe but also improves the overall quality of the finished piece.

In terms of functionality, the G6042/3 includes an array of user-friendly features, such as a convenient digital readout for speed, an easy-to-access tailstock, and a quick-release tool rest. The tool rest can be adjusted effortlessly, allowing woodworkers to achieve the perfect angle for their projects. Additionally, the lathe comes with multiple drive pulleys, further enhancing its adaptability to various turning tasks.

An important technological advancement in the G6042/3 is its integrated drive system. This modern feature reduces maintenance needs while providing robust power for demanding projects. Moreover, it minimizes noise and vibration, creating a more enjoyable working experience.

Lastly, the Grizzly G6042/3 supports a wide range of accessories and attachments, enabling users to expand their toolset as needed. This flexibility ensures that the lathe can grow alongside a woodworker’s skills and ambitions.

In summary, the Grizzly G6042/3 is an exceptional wood lathe that combines durability, versatility, and advanced technology. Its robust construction, powerful motor, adjustable features, and support for accessories make it an ideal choice for anyone looking to elevate their woodworking experience. Whether you are crafting fine furniture or creating artistic pieces, the G6042/3 is equipped to help you achieve outstanding results.
Top Page Image Contents