OPERATION
Loading Stapler
To load your stapler:
1.Disconnect the air supply from the stapler!
2.Push the magazine latch in the direc- tion shown in Figure 1.
Figure 1. Releasing magazine latch.
3.Pull back the magazine cover until it stops.
4.Point the stapler up and insert a stick of staples into the magazine as shown in Figure 2. Make sure that the point- ed ends of the staples point in the same direction as the stapler nose piece.
Figure 2. Loading staples into stapler.
5.Push the magazine cover forward until the magazine latch locks in place.
G6042/G6043 18 Gauge Stapler Kit |