Grizzly G6042/3 instruction manual AMP Length Rating

Page 3

Safety Instructions For Power Tools

10.USE PROPER EXTENSION CORD for the tool. Make sure your extension cord is in good condition. Conductor size should be in accordance with the chart below. The amperage rating should be listed on the motor or tool nameplate. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Your extension cord must also con- tain a ground wire and plug pin. Always repair or replace extension cords if they become damaged.

Minimum Gauge for Extension Cords

AMP

 

LENGTH

 

RATING

25ft

50ft

100ft

0-6

18

16

16

7-10

18

16

14

11-12

16

16

14

13-16

14

12

12

17-20

12

12

10

21-30

10

10

No

11.WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Non-slip footwear is recom- mended. Wear protective hair cover- ing to contain long hair.

12.ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty. Everyday eye- glasses only have impact resistant lenses, they are NOT safety glasses.

13.SECURE WORK. Use clamps or a vise to hold work when practical. It is safer than using your hand and frees both hands to operate tool.

14.DO NOT OVERREACH. Keep proper footing and balance at all times.

15.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories.

16.DISCONNECT TOOLS before ser- vicing and changing accessories.

17.REDUCE THE RISK OF UNINTEN- TIONAL STARTING. Make sure switch is in off position before plug- ging in.

18.USE THE RECOMMENDED ACCESSORIES. Consult the owner’s manual for recommended accessories. The use of improper accessories may cause risk of injury.

19.CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for align- ment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

20.NEVER LEAVE TOOL RUNNING UNATTENDED. Turn the power off, and do not leave tool until it comes to a complete stop.

21.NEVER ALLOW UNTRAINED USERS TO RUN THIS TOOL WHILE UNSUPERVISED.

22.IF YOU ARE UNSURE OF THE INTENDED OPERATION, STOP USING THE TOOL. Seek formal training or research books or maga- zines that specialize in power tools.

-2-

G6042/G6043 18 Gauge Stapler Kit

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model G6042/3 Gauge Stapler KITBefore Operating This Equipment SafetyAMP Length Rating Basic Stapler Safety Commentary IntroductionCompressed Air System Safety Yoke MechanismLoading Stapler OperationExample of staple deflection Operating StaplerDisconnect the stapler from the air supply Clearing Jammed StaplesOiling Stapler Cleaning StaplerReplacing Pistons/O-Rings Maintenance Notes 40A 49A 19A PBREAKDOWNARTG6042These items are not shown in the illustration 60 40A 34 P6043034 Trgr Valve Head 35 P6043035 Trgr Valve Stem Problem Cause Action TroubleshootingWarranty and Returns Warranty Card Place Stamp Here

G6042/3 specifications

The Grizzly G6042/3 is an advanced wood lathe, specifically designed for both professional and hobbyist woodworkers. This powerful tool stands out in the market due to its combination of precise engineering and user-friendly features, making it a favorite among those seeking to enhance their craft.

One of the most notable features of the G6042/3 is its robust construction. With a heavy-duty cast iron body, this lathe minimizes vibrations, ensuring a stable platform for turning. This stability is crucial when working on intricate designs or larger projects, as it provides consistent results and smoother finishes. The lathe's bed is precision-machined, offering a flat surface that contributes to accuracy in all your woodworking tasks.

The G6042/3 boasts a potent motor that delivers impressive torque, allowing for a variety of turning speeds. With its variable speed control, users can easily adjust the RPM to suit different applications, from rough turning to detailed finishing work. This feature not only increases the versatility of the lathe but also improves the overall quality of the finished piece.

In terms of functionality, the G6042/3 includes an array of user-friendly features, such as a convenient digital readout for speed, an easy-to-access tailstock, and a quick-release tool rest. The tool rest can be adjusted effortlessly, allowing woodworkers to achieve the perfect angle for their projects. Additionally, the lathe comes with multiple drive pulleys, further enhancing its adaptability to various turning tasks.

An important technological advancement in the G6042/3 is its integrated drive system. This modern feature reduces maintenance needs while providing robust power for demanding projects. Moreover, it minimizes noise and vibration, creating a more enjoyable working experience.

Lastly, the Grizzly G6042/3 supports a wide range of accessories and attachments, enabling users to expand their toolset as needed. This flexibility ensures that the lathe can grow alongside a woodworker’s skills and ambitions.

In summary, the Grizzly G6042/3 is an exceptional wood lathe that combines durability, versatility, and advanced technology. Its robust construction, powerful motor, adjustable features, and support for accessories make it an ideal choice for anyone looking to elevate their woodworking experience. Whether you are crafting fine furniture or creating artistic pieces, the G6042/3 is equipped to help you achieve outstanding results.
Top Page Image Contents