3. While holding handle down, slip handle lock up over | Handle | |
handle (see Figure 3). | ||
|
Handle
Lock
Loading Tool
1.Lock handle (see Locking Handle, page 2).
2.Turn staplegun upside down. At rear of tool, squeeze latch on end of staple channel (see Fig- ure 4). Pull staple channel cover out of staple channel until it stops (see Figure 4).
3.Drop staples into staple channel. Make sure staple points are facing up (see Figure 4).
4.Slide staple channel cover back into staple channel until it locks into place.
Figure 3
Staples with
Points Facing Up
Staple Channel
Staple Channel Cover
Figure 4
Operating Tool
1.Unlock handle if locked.
2.Grip tool firmly. Press
tool against work |
|
| |
surface (see Figure 5). |
|
| |
3. Depress handle firmly to |
|
| |
fire. Do not allow tool to |
|
| |
jump or recoil. Note: For |
|
| |
greater driving force on |
|
| |
harder surfaces, press |
|
| |
thumb or palm of free |
|
| |
hand against head of | Figure 5 | Figure 6 | |
tool (see Figure 6). | |||
|
|
3