Craftsman 315.11401 manual Batteries, Battery Pack Removal and Preparation For Recycling

Page 13

_ WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other

part may create a hazard or cause product damage.

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

_1 WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils,

etc. come in contact with plastic parts. They contain chemicals that can damage, weaken or destroy plastic.

BATTERIES

The battery pack for this tool is equipped with nickel- cadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing.

The batteries in this tool have been designed to provide maximum trouble free life. However, like all batteries, they wilt eventually wear out. Do not disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when wearing rings and jewelry, could result in a serious burn.

To obtain the longest possible battery life, we suggest the following:

To preserve natural resources, please recycle or dispose of batteries properly.

This product contains nickel-cadmium batteries. Local, state or federal laws may prohibit disposal of nickel-cadmium batteries in ordinary trash.

Consult your local waste authority for information regarding available recycling and/or disposal options.

Do not abuse power tools. Abusive practices can damage toot as well as workpiece.

Only the parts shown on parts list, page 15, are intended to be repaired or replaced by the customer. All other parts should be replaced at a Sears Service Center.

dl_ WARNING: Do not attempt to modify this tool or create accessories not recommended for use with

this toot. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

Store and charge your batteries in a coot area. Temperatures below 50°F or above 100°F wilt shorten battery life.

Never store batteries in a discharged condition. Recharge them immediately after they are discharged.

All batteries gradually lose their charge. The higher the temperature the quicker they lose their charge. If you store your toot for long periods of time without using it, recharge the batteries every month or two. This practice will prolong battery life.

BATTERY PACK REMOVAL AND PREPARATION

FOR RECYCLING

,_1 WARNING: Upon removal, cover the battery pack's terminals with heavy duty adhesive tape. Do not

attempt to destroy or disassemble battery pack or remove any of its components. Nickel-cadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.

13

Image 13
Contents OperatorsManual Full ONE Year Warranty on Craftsman Cordless NAILER/STAPLER Model Battery Pack Charger Electrical SafetyPersonal Safety Work AreaAdditional Rules for Safe Operation ServiceInjury Symbol Meaning Symbol Name DESIGNATION/EXPLANATIONKnow Your NAILER/STAPLER SwitchLOCK-OFF Button Page Packing List InstructionsHOT Battery Pack Charging Battery PackCool Battery Pack Battery Latches Depresslatchesto Releasebatterypack To Install Battery PackLatch To Remove Battery Pack StaplesTo Staple Nails ApplicationsBatteries Battery Pack Removal and Preparation For RecyclingPage Craftsman 19.2 Volt Cordless NAILER/STAPLER Model no Parts ListMY-HOME