Before Use
≥When the [CHARGE] Lamp goes off, charging is completed.
≥When charging the overdischarged battery, the [CHARGE] Lamp blinks at first, but the battery is charged normally. When the temperature of the battery is too high or low, the [CHARGE] Lamp blinks and the charging time becomes longer than usual.
2Attach the charged Battery to the Movie Camera.
Disconnecting the Power Source
Set the [OFF/ON] Switch (48) to [OFF] and, while pressing the [PUSH BATT] Button (55), slide the Battery or DC Input Lead upward to disconnect it.
(55)PUSH BATT
ON
|
| F |
| F | |
(48) | O |
|
|
| |
≥For other notes concerning this item, see
Charging Time and Available Recording Time
A | 2h45min. | |
| B | 2h.(1h30min.) |
| C | 1h.(45min.) |
| A | 3h55min. |
| B | 3h.(2h15min.) |
| C | 1h30min.(1h10min.) |
ACharging Time
BMaximum Continuous Recording Time C Intermittent Recording Time (Intermittent Recording Time is the available recording time with repeated recording and stopping actions.)
“1h10min.” indicates 1 hour and 10 minutes.
≥Battery
≥The times shown in the table are approximate times. The numbers indicate the recording time when the Viewfinder is used. The numbers in parentheses indicate the recording time when the LCD Monitor is used. In actual use, the available recording time may be shorter.
≥The times shown in the table are for continuous recording at a temperature of 25oC and humidity of 60%. If the Battery is charged at a higher or lower temperature, the charging time may be longer.
≥In the following cases, the available recording time becomes shorter.
≥You use both of Viewfinder and LCD Monitor simultaneously when using the 0 Lux Night View function, rotating the LCD Monitor frontward to record yourself.
≥When you set [EVF ON/AUTO] to [ON]. ≥When you use the Movie Camera with
lighting the LCD Monitor up by pressing the [POWER LCD] Button.
≥When you use accessories applicable to the Smart Accessory Shoe (Stereo Zoom Microphone, Video DC Light, etc.).
The One-touch Free Style Grip Belt
ªTo Use as a Grip Belt
Adjust the length of the Grip Belt to the size of your hand.
1Detach the end of the Grip Belt.
2Adjust the length of the Grip Belt to the size of your hand.
3Reattach the Grip Belt.
9
