Others

CARD LOCKED:

The write protection switch on the SD Memory Card is set to [LOCK].

DISCONNECT USB CABLE:

You are attempting to turn the Mode Dial in PC Mode with connecting the USB Cable to the Movie Camera.

PC DOES NOT SUPPORT USB2.0:

In the MotionDV STUDIO Mode, your personal computer does not support USB

2.0Hi-Speed.

CAN NOT USE USB:

You are attempting to connect the USB Cable while the DV Cable is connected.

CAN NOT OPERATE (AE LOCK MODE):

You are attempting to press the [COLOUR NIGHT VIEW] Button with setting the [AUTO/MANUAL/AE LOCK] Switch to [AE LOCK].

UNABLE TO WRITE (WIDE/PRO CINEMA MODE):

You are attempting to press the [PHOTO SHOT] Button with setting the Wide/Pro-Cinema Function in Tape Recording Mode.

CHANGE TO 640k480:

You are attempting to use the function to record still pictures which is not available unless the [PICTURE SIZE] is set to [640k480].

PRINTER ERROR:

Check the connected printer.

THERE IS NO INK:

There is no ink. Check the connected printer.

THERE IS NO PAPER:

There is no paper. Check the connected printer.

Notes and Hints

ªConcerning the Power Supply

When the Movie Camera is used for a long time, the Camera body becomes warm, but this is not

a malfunction.

If the [CHARGE] Lamp does not light up although the Battery is attached to the AC Adaptor, detach the Battery and reattach it.

ªInserting/Removing the Cassette

In the case of using a previously recorded Cassette, you can use the Blank Search Function to find the position where you want to continue recording.

If a new Cassette is inserted, rewind to the beginning of the tape before starting recording.

When inserting the cassette, make sure it faces in the right direction and then push it in until it stops.

When the Cassette Holder is in action, do not touch anything except the [PUSH] mark.

When closing the Cassette Compartment Cover, do not get anything caught in the cover, such as a cable of the Free Style Remote Controller with Mic.

ªAlarm Sounds

When [BEEP SOUND] on the [INITIAL] Sub-Menu on the [TAPE RECORDING MENU] or the [TAPE PLAYBACK MENU] is set to [ON], confirmation/alarm beeps are issued as follows.

1 Beep

When you start recording

When you switch the [OFF/ON] Switch from [OFF] to [ON]

2 Beeps

When you pause recording 2 Beeps for 4 times

If you operate a wrong operation before or during recording

ªRecording Check

For Recording Check, the recording speed mode (SP/LP) must be the same as the mode used for the recording. If different, playback images will be distorted.

ªFrame Moving Pictures (Frame Mode)

It is not possible to use the Digital Effect Modes of [EFFECT1]. (-33-)

Set [REC MODE] to [NORMAL] for regular recording.

When the [PICTURE SIZE] is set to [1280k960], you cannot set to the Frame Mode.

ªRecording on a Card

Pictures with wide-screen format signals cannot be copied.

When the colour of the screen changes or blurs, adjust the shutter speed manually to 1/50 or 1/100.

Photoshot

When you record pictures in the Tape Recording Mode, the brightness of the picture may differ from the one recorded in the Card Recording Mode.

The sound cannot be recorded.

The file format supported by this Movie Camera is JPEG.

If [NORMAL] or [ECONOMY] is selected for recording, mosaic-pattern noise may appear on a playback image depending on the image content.

54

Page 54
Image 54
Panasonic NV-GS400GN Concerning the Power Supply, Inserting/Removing the Cassette, Alarm Sounds, Recording Check