Before Use
13
2Adjust the LCD Monitor angle according to
the desired recording angle.
≥The LCD Monitor can rotate a maximum of
180o 1 from the vertical position upwards
and a maximum of 90o 2 to the downward
direction. Forcefully rotating the LCD Monitor
beyond these ranges will damage the Movie
Camera. You cannot rotate the LCD Monitor
when it is opened 120o angle. Therefore, do
not rotate it forcibly.

Closing the LCD Monitor

Push the LCD Monitor until it is securely locked.
≥Make sure the Card Slot Cover is closed.

ªAdjusting Brightness and Colour

Level

When [LCD/EVF SET] on the [LCD/EVF]
Sub-Menu is set to [YES], the following items are
displayed.
LCD Brightness [LCD BRIGHTNESS]
Adjusts the brightness of the image on the LCD
screen.
LCD Colour Level [LCD COLOUR LEVEL]
Adjusts the colour saturation of the image on the
LCD screen.
Brightness of the Viewfinder
[EVF BRIGHTNESS]
Adjusts the brightness of the image in the
Viewfinder.

To Adjust

Press the [;/∫] Button and select the item to be
adjusted, and then press the [6/5] Button to
raise or lower the number of vertical bars in the
Bar Indication.
≥A larger number of vertical bars indicates
stronger brightness or colour saturation.
290o1180o
1LCD BRIGHTNESS
[-]||||----[+]
LCD COLOUR LEVEL
[-]||||----[+]
EVF BRIGHTNESS
[-]||||----[+]
;/∫:SELECT &/%:SETUP
!/MENU:EXIT
LCD/EVF SETUP

To Increase the Brightness of the Entire LCD

Monitor

Press the [POWER LCD] Button.
When you press the [POWER LCD] Button, the
LCD monitor becomes bright about twice as
much as usual.
The Power LCD Lamp (30) lights up.
≥When turning the power on with using AC
Adaptor, [POWER LCD] function is
automatically effective.
≥When you rotate the LCD Monitor 180o and then
close it, it resumes normal brightness.

To Resume Normal Brightness

Press the [POWER LCD] Button again.

To Change the Picture Quality of the LCD

Monitor

Set the [LCD AI] on the [LCD/EVF] Sub-Menu to
[ON] or [OFF].
[ON]: The screen image becomes clear and
vivid. (The effect varies according to the
recording scene.)
≥When Power LCD Lamp lights up, [LCD AI] is
automatically set to [ON]. You cannot change
this setting.
≥These adjustments do not affect the recorded
images.
≥For other notes concerning this item, see -65-.
Using the Menu Screen
To facilitate the selection of a desired function or
setup, this Movie Camera displays various
function setups on Menus.
≥When operating the menu with the Viewfinder,
set [LCD/EVF] >> [EVF ON/AUTO] >> [ON] or
rotate the LCD monitor by 180o.
1Press the [MENU] Button (16).
POWER
LCD
(30)
MENU
STILL
FADE
ENTER
(16)
400GN.book 13 ページ ２００４年６月３日　木曜日　午後１時４９分