Panasonic NV-GS400GN Quick Start, Continuous Photoshot, Selecting the Size of Photoshot Images

Recording Mode

≥The Shutter Chance Mark appears even when the [PHOTO SHOT] Button is not pressed. Check it for your reference.

≥Even if the [PHOTO SHOT] Button is pressed halfway, the Shutter Chance Mark does not appear in Manual Focus Mode.

Selecting the Size of Photoshot Images

1Tape Recording Mode:

Set [TAPE RECORDING MENU] >> [CARD]

>>[PICTURE SIZE] >> [1280k960] or [640k480].

Card Recording Mode:

Set [CARD RECORDING MENU] >> [CARD]

>>[PICTURE SIZE] >> [2288k1728],

[1600k1200], [1280k960] or [640k480].

2Keep pressing the [PHOTO SHOT] Button

(52).

PHOTO

SHOT

(52)

≥You can also activate Continuous Photoshot Function after pressing the [PHOTO SHOT] Button halfway. In this case, if the Image Stabilizer Function (-24-) is set to [ON], the Image Stabilizer Function works more effective.

≥When [ON] is selected, the still pictures can be recorded in approximately 0.7 second intervals until the [PHOTO SHOT] Button is released or 10 pictures are recorded. (You cannot use the Continuous Photoshot function if the shutter

(16)

STILL

ENTER

speed is set to 1/2, 1/3, 1/6 or 1/12.)

MENU FADE

Selecting the Quality of Photoshot Images

1Set [TAPE RECORDING MENU], [TAPE PLAYBACK MENU] or

[CARD RECORDING MENU] >> [CARD] >> [PICT QUALITY] >> a desired image quality.

STILL

(16)		ENTER
	MENU	FADE

ªContinuous Photoshot

The still pictures can be recorded on a Card at a regular intervals.

≥Available only with [640k480] picture size.

1Set [CARD RECORDING MENU] >> [CARD] >> [BURST MODE] >> [ON].

STILL

(16)		ENTER
	MENU	FADE

≥The [ ] Indication appears.

≥For other notes concerning this item, see -54-.

Quick Start

By pressing the [QUICK START] Button (45), and the Movie Camera will be ready for recording in approximately 1.7 seconds after the Movie Camera is turned on.

1Press the [QUICK START] Button (45).

≥The Quick Start Recording Lamp lights up.

(45) QUICK START

2Set the [OFF/ON] Switch (48) to [OFF].

≥The Quick Start Recording Lamp remains lit.

ON

	F
F
O

(48)

3Set the [OFF/ON] Switch (48) to [ON].

≥The Movie Camera will be ready for recording in approximately 1.7 seconds.

To Cancel the Quick Start

Keep the [QUICK START] Button pressed for approximately 2 seconds and make sure the Quick Start Recording Lamp is not lit.

≥For other notes concerning this item, see -55-.

22