Panasonic NV-GS400GN Recording from a Tape onto a Card, To Cancel Audio Dubbing

Editing Mode

Editing Mode

Recording from a Tape onto a Card

Still pictures can be recorded on the Memory Card from scenes that have already been recorded on a cassette.

1Set the Mode Dial (44) to Tape Playback

Mode.

(44) SD PC

2Start playback and set the Movie Camera to Still Playback Mode at the scene you wish to record, and press the [PHOTO SHOT] Button (52).

PHOTO

(52)SHOT

Audio Dubbing

You can add music or narration to the recorded Cassette.

≥If the tape recorded in the [16bit] Mode is dubbed with the Audio Dubbing function, the original sound is erased. (If you wish to preserve the original sound, use the [12bit] Mode when recording.)

≥Audio Dubbing cannot be performed on a

recording made in LP Mode. (-18-)

1Set [TAPE PLAYBACK MENU] >>

[AV IN/OUT] >> [AV JACK] >> [IN/OUT].

STILL

(16)		ENTER
	MENU	FADE

2Continuing the aforesaid setup, select [A.DUB INPUT] >> [MIC] or [AV IN].

≥Set to [AV IN] when external device is used, and to [MIC] when an external or built-in microphone is used.

3Press the [;] Button (81) on the Remote

Controller where you want to add new sound.

MULTI/				T
	¥REC	A.DUB
P-IN-P			r	(67)
			sVOL
V/REW	PLAY	FF/W		W
6	1	5
STILL ADV	PAUSE	STILL ADV		(81)
E	;	D
INDEX	STOP	INDEX		P.B. ZOOM
K	∫	L

SELECT

4Press the [A.DUB] Button (67) on the

Remote Controller.

5To start Audio Dubbing, press the [;] Button (81) on the Remote Controller.

To Cancel Audio Dubbing

Press the [;] Button (81) on the Remote Controller.

The Movie Camera is in the Still Playback Mode again.

To Play Back the Sound Recorded by 12bit Audio Dubbing

Set [TAPE PLAYBACK MENU] >> [PLAYBACK] >> [12bit AUDIO] >> [ST2] or [MIX].

ST1: It plays back only the original sound.

ST2: It plays back only the sound added by Audio Dubbing.

MIX: It plays back both the original sound and the sound added by Audio Dubbing simultaneously.

To Dub Audio While Listening to a

Pre-recorded Sound

When pausing the audio dubbing, set the

[12bit AUDIO] on the [PLAYBACK] Sub-Menu to [ST2] and you can check the pre-recorded sound. When a microphone is used for audio dubbing, use headphones to listen to the pre-recorded sound while dubbing the audio. (When using headphones, set [AV JACK] to [OUT/PHONES].) When the line input is used, you can dub audio while listening to the pre-recorded sound from the speaker.

≥For other notes concerning this item, see -61-.

45