Before Use
≥Attach the other end of the Shoulder Strap to the other Shoulder Strap Holder in the same way.
1 
Inserting a Cassette
1Slide the [OPEN/EJECT] Lever (41) toward the front and pull down to open the Cassette Compartment Cover.
(41) | OPEN/ EJECT |
|
2Insert a Cassette.
3Close the Cassette Holder by pressing the [PUSH] mark 1.
1
PUSH
4Close the Cassette Compartment Cover.
ªAccidental Erasure Prevention
Opening the accidental erasure prevention slider 1 on the cassette (by sliding it to the [SAVE] arrow direction) prevents recording. To enable recording, close the accidental erasure prevention slider (by sliding it to the [REC] arrow direction).
1
R E C
SAVE
Using a Card
A Card can be used to record pictures.
ªCaution before inserting/removing a
Card
Be sure to turn off the Movie Camera.
≥Otherwise, the Movie Camera may not function properly or it may cause the loss of recorded data in a Card.
ªInserting a Card
1Slide the [OPEN] Lever (6) to open the Card Slot Cover (4).
(4)
(6) | OPEN |
2While holding the Memory Card with its cut corner on top 1, insert it into the Card Slot.
1
3Close the Card Slot Cover (4) securely.
Removing the Card
Open the Card Slot Cover and then pull the Card straight out.
≥After removing the Card, close the Card Slot Cover.
ª[ACCESS] Lamp (11)
(11)
ACCESS
While the Movie Camera is accessing the Card (reading, recording, playback or erasing), the [ACCESS] Lamp lights up.
≥While the [ACCESS] Lamp is on, never attempt to open the Card Slot Cover, to pull out the Card, to turn off the Movie Camera. Such actions will damage the Card, and recorded data, and cause the Movie Camera to malfunction.
≥It may take time to record pictures if you use MultiMediaCard. (The [ACCESS] Lamp keeps turning on. However, this is not a malfunction.)
≥For other notes concerning this item, see
11
