Others
59
≥When the [ß], [ßi], [ßj], [ßA], [ßAi] or [ßAj]
Indication is displayed, the Video Flash can be
lighted. (When flashing, the Video Flash is
charging.) When the [ ] Indication is
displayed, the Video Flash will not be lighted.
≥Charging the Video Flash takes 4 seconds
maximum after lighting.
≥When the [P-IN-P] Button is pressed or Title is
created, Video Flash is also lighted.
≥When the flash mode is set to Auto mode and
the Shutter Speed, Iris or Gain is adjusted, the
Indication ([ßA] etc.) may disappear and the
Video Flash may not be lighted.
Using the Video Flash VW-FLH3E (optional)
≥Using the Video Flash outdoors or with
backlight or other bright conditions may result in
white blotches (colour blotches) on the pictures.
In this case, either adjust the iris manually or
use the Backlight Compensation Function.
≥Using the Video Flash VW-FLH3E (optional)
enables you to record still pictures farther than
2.5 metres in a dark place. The available range
is approximately 1 to 4 metres.
≥The Video Flash VW-FLH3E (optional) and the
Auto Pop-up Flash cannot be used
simultaneously.
≥When using the Video Flash VW-FLH3E
(optional), the shutter speed, the iris and the
white balance are fixed.
≥When the Video Flash is ready, the [ß]
Indication appears on the screen of the Movie
Camera.
≥The brightness of the Video Flash cannot be
adjusted.
≥Also refer to the operating instructions of the
Video Flash carefully.
ªRed Eye Reduction Function
≥Even if the [RED EYE] is set to [ON], you still
may get red eyes phenomenon depending on
the recording condition.
ªDigital Effect Functions
≥If you have set [EFFECT2] to [B/W] or [SEPIA],
changing the selected White Balance Mode is
not possible. (-27-)
≥Setting the Cinema Mode cancels the
Picture-in-Picture Mode and the Multi-Picture
Mode.
≥During the Digital Still Picture Mode, the Digital
Effect Functions cannot be set.
≥When the [PICTURE SIZE] is set to [1280k960]
in the Tape Recording Mode, pictures cannot be
recorded with the Photoshot recording although
the Digital Effect Functions are set.
In the following cases, using the [EFFECT1]
on the [DIGITAL] Sub-Menu is not possible.
≥When the Night View Functions is set (-25-)
In the following cases, using the Digital Effect
Function is not possible.
≥Title In
Multi-Picture Mode
≥If the [MULTI] Button is pressed while
self-recording Mirror Mode (-20-) is used, the still
picture is displayed from the upper right corner
of the screen, but, in reality, the picture is
recorded from the upper left corner as usual.
≥The quality of Multi images deteriorates slightly.
≥The top and bottom of the Multi pictures will be
cut off slightly.
Picture-in-Picture Mode
≥If the Mode Dial is operated, the smaller picture
disappears.
≥Titles cannot be inserted into the smaller
picture.
Wipe Mode and Mix Mode
If the following operation is carried out, stored
images will be erased, and Wipe and Mix
Functions cannot be used.
≥Set other item of Digital Effect
≥Operate the [OFF/ON] switch or Mode Dial
≥Insert or eject a cassette
ªPlaying Back
Repeat Playback
If you continue to press the [1] Button for
5 seconds or longer, the Movie Camera switches
to Repeat Playback Mode, and the [R !]
Indication appears. (To cancel Repeat Playback
Mode, set the [OFF/ON] Switch to [OFF].)
Listening to Playback Sound through
Headphones
If you want to use the headphones to listen to the
playback sound, set [AV JACK] to
[OUT/PHONES] and connect the headphones to
the [PHONES] Socket (-5-) on the Movie Camera.
In this case, no sound (including warning and
shutter sounds) will be reproduced through the
built-in speaker of the Movie Camera.
Choosing Sound during Playback
You can select the sound by using the
[AUDIO OUT] setting on the [PLAYBACK]
Sub-Menu.
STEREO: Stereo Sound (main sound and sub
sound)
L: Left channel sound (main sound)
R: Right channel sound (sub sound)
400GN.book 59 ページ ２００４年６月３日　木曜日　午後１時４９分