Before Use
10

ªTo Use as a Hand Strap

Using the Grip Belt as the hand strap makes it
easier to handle and carry a Movie Camera. It is
more convenient to use with the Free Style
Remote Controller with Mic.
1Detach the Grip Belt while pressing the Grip
Belt Release Button (32).
2Detach the end of the Grip Belt.
3Slide A to the direction of the arrow and
reattach the Grip Belt.
4Attach the Grip Belt around your wrist.
Reattach the Grip Belt to the Grip Belt
Attachment until it clicks.
(32)

A

Attaching the Lens Cap
To protect the Lens surface, attach the Lens Cap.
1Pass the end of the Lens Cap Cord through
the hole in the Grip Belt Attachment part
and the Lens Cap through the Lens Cap
Cord.
The removed Lens Cap can be hooked onto the
Grip Belt. (It is not possible when using as a
hand strap.)
When you are not recording, be sure to cover
the Lens with the Lens Cap for protection.
Attaching the Shoulder Strap
We recommend that you attach the Shoulder
Strap before going out of doors to record so as to
avoid dropping the Movie Camera.
1Pull the end of the Shoulder Strap through
the Shoulder Strap Holder (57) on the Movie
Camera.
2Fold the end of the Shoulder Strap, run it
through the Shoulder Strap Length
Adjuster, and pull it.
Pull it out more than 2 cm 1 from the
Shoulder Strap Length Adjuster so that it
cannot slip off.
400GN.book 10 ページ 2004年6月3日 木曜日 午後1時49分