Chicago Electric 67707 Work Piece and Work Area Set Up, Charging the Battery Pack

Page 9

Work Piece and Work Area Set Up

1.Designate a work area that is clean and well-lit. The work area must not allow access by children or pets to prevent distraction and injury.

2.Route the power cord of the Charger along a safe route without creating a tripping hazard or exposing the power cord to possible damage.

Charging the Battery Pack

The Battery Pack needs to be charged before first use. It is recommended to recharge the Battery after every use.

Charger (506)

Indicator Light

 

Charger Plug

 

 

Charger

Battery

Figure 2

Pack

Socket

 

1.Place the Battery Pack on a dry fireproof surface in a room where the temperature ranges from 33-112° F.

2.Allow a recently exhausted Battery Pack to cool completely before charging. Make sure the Battery Pack is undamaged; do not charge a cracked or leaking pack.

3.Insert the Charger’s plug into the Charger Socket on the Battery Pack, and plug the Charger into a grounded, 120V outlet. The indicator light on the Charger will turn red showing that the battery is charging.

4.When the indicator light turns green, the Battery Pack is fully charged. This process will take approximately 90 minutes.

5.Unplug the Battery Pack from the Charger and the Charger from the wall outlet.

Note: Do not use a battery pack immediately after charging. Allow it to cool first. Store the Charger and Battery Packs not in use indoors, away from children.

Installing Attachments

To prevent serious injury

from accidental operation:

Make sure the Battery Pack is removed from the Tool before installing accessories, or adjusting the tool.

1.To install an accessory:

a.Hold the Spindle (3) with a 13mm wrench (sold separately), and unthread the Cap Screw (1) using the Hex Wrench (505). Remove the Cap Screw and Retainer (2).

Cutting Blade

(502)

Four Pins on

Spindle (3)

Figure 3

b. Install the desired accessory in any one of seven forward orientations by aligning four of the holes in the accessory over the four pins on the Spindle.

CAUTION: Always face the accessory away from the handle to avoid injury.

SKU 67707

For technical questions, please call 1-800-444-3353.

Page 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 12V Lithium-Ion Multifunction Tool For technical questions or replacement parts, please callGeneral Power Tool Safety Warnings Save This ManualSave all warnings and instructions for future reference For technical questions, please call Multifunction Tool Safety Warnings For technical questions, please call Grounding Vibration SafetyDouble Insulated Tools Tools with Two Prong Plugs Outlets for 2-Prong PlugExtension Cords Symbology Set up SpecificationsUnpacking Instructions for putting Into useWork Piece and Work Area Set Up Charging the Battery PackInstalling Attachments General Operating Instructions SKU For technical questions, please call Maintenance Servicing Problem Possible Causes Likely Solutions TroubleshootingPart Description Parts List & Assembly DiagramQty Part Description Qty For technical questions, please callRecord Product’s Serial Number Here Limited 90 DAY Warranty

67707 specifications

The Chicago Electric 67707 is a prominent power tool designed for woodworkers and DIY enthusiasts alike, renowned for its efficiency and versatility. This model is part of a broader line of power tools offered by Chicago Electric, a brand recognized for delivering reliable and affordable solutions for both home and professional use.

One of the main features of the Chicago Electric 67707 is its powerful 5.5-amp motor. This robust motor enables the tool to perform effectively, slicing through various materials with ease. Whether you are working on softwoods or tougher hardwoods, the 67707 provides the necessary strength to make clean and precise cuts. The adjustable speed settings allow users to tailor the tool’s performance according to the specific requirements of their projects, enhancing both efficiency and control.

The 67707 features a maximum cutting capacity of 1-3/16 inches at 90 degrees, which is ideal for a wide range of applications. Its durable construction includes a sturdy base and a lightweight design, promoting stability during operation while reducing user fatigue. The ergonomic handle provides a comfortable grip, ensuring a secure hold even during extended periods of use.

In terms of technology, the Chicago Electric 67707 incorporates a powerful orbital action feature that allows for rapid cutting on a variety of materials. This feature is particularly beneficial for users who require swift and efficient results. Furthermore, the tool is equipped with a blade changing system that simplifies the process of switching out blades, allowing users to seamlessly transition between different cutting tasks.

Another characteristic that sets the Chicago Electric 67707 apart is its safety features. The integrated safety switch helps prevent accidental startups, providing peace of mind for operators. Additionally, the built-in dust blower keeps the cutting line clear for better visibility, further enhancing user safety and cutting precision.

Overall, the Chicago Electric 67707 is an excellent choice for anyone looking for a reliable jigsaw that combines power, versatility, and user-friendly characteristics. Its combination of features makes it suitable for both professional applications and everyday projects, ensuring it remains a valuable addition to any toolkit. Whether you are crafting furniture, making intricate cuts or tackling renovation tasks, the Chicago Electric 67707 proves to be a dependable ally in your woodworking endeavors.
Top Page Image Contents