Installation, cont’d
PRELIMINARY
Red |
|
|
|
White | Green Black | Shield | Type A connector |
|
USB Type A-to-B (or mini B) cable with the Type B connector removed
3.Twist the exposed shield strands together.
4.Strip 1/8 inch (4.5 mm) of the insulation from the end of each colored wire of the cable.
5.Connect the colored wires and the twisted shield to the HUB4 as described below. Note that each pin of the connector is labeled above with the color of the wire that should be connected to it (R, W, G, and B), based on the USB standard for wiring color schemes.
V+/R — +5 VDC. Connect the red wire to this port.
_/B — Ground. Connect the black wire to this port. S — Shield. Connect the braided shield to this port.
6.Plug the Type A end of the USB cable into a USB port on your computer.
