PRELIMINARY
Introduction
About this Manual
This manual contains information about the installation and operation of the Extron USB HUB4 AAP and the USB HUB4 MAAP. The terms “hub” and “HUB4” are used to refer to both models interchangeably when instructions apply to both.
About the USB HUB4
The USB HUB4 AAP and USB HUB4 MAAP are compact,
Features
The USB HUB4 products feature the following:
USB 2.0 compatibility — The HUB4 is compatible with USB 2.0, enabling communication with a variety of USB peripheral devices.
Mounting options — The HUB4 faceplate can be mounted on a wall, furniture, or in Extron architectural products (such as Cable Cubbies or HSA Hideaway Surface Access enclosures) that accept
Power — The USB HUB4 can be powered directly from a computer via the USB connection, or with an optional Extron PS 1210 C external 1 A, 12 VDC power supply.
Front panel LEDs —
•The Activity LED lights when any peripheral device has been enumerated
(has been recognized and has had communication established) by the
USB host and is currently communicating with it.
•The Power LED lights when the HUB4 is receiving power from either an external power supply through the Power In captive screw port or from the USB host connection.
Multiple USB device connections — The USB HUB4 can be connected to a host computer either by a conventional Type
Four USB Type A connectors on the front panel enable up to four peripheral devices to be connected to a host PC via a single USB connector on the computer.