4en | Installing the Recessed Camera Mount Flush Mount Ceiling Kit
F.01U.126.944 | 1.0 | 2009.04 Mounting Guide Bosch Security Systems, Inc.
2 Installing the Recessed Camera Mount
Use this mount to install a FlexiDome IP (NWD-4xx) camera or
an AutoDome Easy Analog or IP (VEZ series) camera. The VDA-
NWDFMT can be secured to a ceiling tile or to a drywall ceiling.
The ceiling must be between 6–23 mm (.24–.91 in.) thick and
be able to support the combined weight of the camera and the
Flush Mount Ceiling kit.
Note: The table below shows the combined weight of the VDA-
NWDFMT and the following cameras:
Table 2 .1 Combined weights for bracket and cameras
Item Weight Combined Weight
VDA-NWDFMT .44 kg (lb)
FlexiDome IP 1.8 kg (3.96 lb) 2.24 kg (4.93 lb)
AutoDome Easy,
IP and Analog
1.3 kg (2.86 lb) 1.74 kg (3.83 lb)
!
WARNING! Ensure that the ceiling can support the combined
weight of the camera and the Flush Mount Ceiling kit. If the
ceiling is not strong enough, use the VDA-NWDSKT support kit.
Refer to the next section for instructions to install the VDA-
NWDSKT support kit.