Bosch Appliances VDA-NWDFMT manual Mounting the FlexiDome IP Camera, FlexiDome IP components

6 en Installing the Recessed Camera Mount Flush Mount Ceiling Kit

2.2Mounting the FlexiDome IP Camera

Use the following image as a reference for the following procedure:

Figure 2.2 FlexiDome IP components

1Mounting plate

2Camera module/base

3 Inner liner

4 Trim ring and dome

1.Determine a secure location for the flush mount ceiling kit. Refer to Table 2.1, Page 4, for weight information.

2.If the ceiling tile is too thin or if it requires extra support, refer to Section 2.1 Installing the VDA-NWDSKT Bracket, Page 5.

WARNING! The ceiling tile or the drywall must be between

!6–23 mm (.24–.91 in.) thick.

3.Remove the Recessed Bracket and the template from the VDA-NWDFMT packaging.

4.Mark the ceiling along the perimeter of the template; then cut the ceiling along the template mark.

F.01U.126.944 1.0 2009.04 Mounting Guide Bosch Security Systems, Inc.