Flush Mount Ceiling Kit Installing the Recessed Camera Mount | en 9
Bosch Security Systems, Inc. Mounting Guide F.01U.126.944 | 1.0 | 2009.04
15. Attach a suspension wire to the top of the recess bracket
at one of the points indicated below and then to a
structural element in the ceiling.
Figure 2.6 Atta ch suspension wire
16. Connect the cables to the connection box, located inside
the Camera Module. Refer to the FlexiDome IP Operating
Instructions for detailed safety instructions and connection
details.
17. Move the excess cabling up into the ceiling.
!
WARNING! You must secure the bracket to a structural ceiling
element with a suspension wire to avoid personal injury and
damage to the camera.