Kramer Electronics VP-81KSi user manual Connecting the Balanced/Unbalanced Stereo Audio Output

Connecting the VP-81KSi 8x1 UXGA/Audio STEP-IN Switcher

5.Connect the RJ-45 AV ON CAT 5 output connector to a compatible TP receiver (for example, TP-120).

6.Connect the unbalanced audio 3.5mm AUDIO OUTPUT jack to an unbalanced audio acceptor (for example, power amplifier).

7.Connect the balanced audio 5-pin terminal block (see Section 6.1) to an audio acceptor1.

8.Connect up to eight remote, contact closure input selection switches to the REMOTE terminal block (see Section 6.2).

9.Connect a PC over a LAN to the Ethernet for remote operation.

10.Set the DIP-switches (see Section 6.6.1) for remote operation. You can connect a PC and/or controller to the:

RS-232 port (see Section 6.3)

RS-485 port (see Section 6.6.1)

11.Connect1 the power cord2.

6.1Connecting the Balanced/Unbalanced Stereo Audio Output

This section illustrates how to wire the devices to the balanced audio output:

•A balanced stereo output connection, see Figure 4

•An unbalanced stereo output connection, see Figure 5

Figure 4: Balanced Stereo Audio Connection

Figure 5: Unbalanced Stereo Audio Connection

1 Not shown in the illustration

2 We recommend that you use only the power cord that is supplied with this machine

10 KRAMER: SIMPLE CREATIVE TECHNOLOGY