Kramer Electronics VP-81KSi user manual Communication Parameters, Default EDID

Communication Parameters

13 Communication Parameters

Table 7 lists the communication parameters as used in Kramer Electronics products.

Table 7: Communication Parameters

RS-232

Protocol 2000					Protocol 3000 (Default)
Baud Rate:			9600		Baud Rate:		115,200
Data Bits:			8		Data Bits:		8
Stop Bits:			1		Stop Bits:		1
Parity:			None		Parity:		None
Command Format:			HEX		Command Format:		ASCII
Example (Output 1 to Input 1):			0x01, 0x81, 0x81, 0x81		Example (Output 1 to Input 1):		#AV 1>1<CR>
			Switching Protocol
P2000 -> P3000					P3000 -> P2000
Command:	0x38, 0x80, 0x83, 0x81			Command:		#P2000<CR>
Front Panel:	Press and hold Output 1 and Output 3			Front Panel:		Press and hold Output 1 and
	simultaneously					Output 2 simultaneously
			Ethernet Factory Default Values
IP Address: 192.168.1.39		Power cycle the unit while pressing the Factory Reset button, located on the
Mask: 255.255.255.0		rear panel of the unit.
Gateway: 192.168.1.1
TCP Port #: 5000
UDP Port #: 50000

14 Default EDID

The default EDID is stored in all inputs.

Monitor
Model name	VP-81K-SI
Manufacturer	KRM
Plug and Play ID	KRM0808
Serial number	2
Manufacture date	2009, ISO week 10
-------------------------
EDID revision	1.3
Input signal type	Analog 0.700,0.000 (0.7V p-p)
Sync input support	Separate, Composite, Sync-on-green
Display type	RGB color
Screen size	360 x 290 mm (18.2 in)
Power management	Standby, Suspend, Active off/sleep
Extension blocs	None
-------------------------
DDC/CI	Not supported
Color characteristics
Default color space	sRGB
Display gamma	2.00
Red chromaticity	Rx 0.611 - Ry 0.329
Green chromaticity	Gx 0.312 - Gy 0.559
Blue chromaticity	Bx 0.148 - By 0.131
White point (default)....	Wx 0.320 - Wy 0.336
Additional descriptors... None
Timing characteristics
Range limits	Not available
30	KRAMER: SIMPLE CREATIVE TECHNOLOGY